Product Application

• Mix  thoroughly  equal  volumes  of  Petrokem   Clear  Sealer W/B resin  and  hardener.( i.e. one  volume  of  resin to one volume  of hardener)  Five  minutes  of  thorough  mixing  is  recommended. Then  gradually add 3-6  volumes of  water  while  stirring  to  thin the  product  to  a suitable viscosity. Use  the mixture  within  1-2 hours.
• Mix  the  above  components  thoroughly for  five  minutes Then add  water gradually ( 4 parts  by volume or  suitable volume of water) and  mix  to obtain a  homogeneous  mixture.
• Apply  the  mixture  to  the  surface  by  using  a  suitable equipment ( spray, brush /roller). The  product  should  absorb  to the concrete or cement  surface for the best results. If the  diluted product  is  not  penetrating to  the  surface then  make arrangement to  dilute  the product  to suit the   requirement. Allow the sealer  to dry at least  for 24 hrs  before using the surface. Another  coat could be applied after 8 hrs if required.  The coating will gain its full toughness in 72 hrs.

Please refer to the technical data sheet for a detailed instruction.

Product Coverage

• Approximately  10 – 28 m² per  1 Kg pack

Available Colors

Reviews